Bending the night away.

When it comes to wire wrapping, I'm all thumbs.  I decided to take the time to practice.  (And I had some friends who were interested in some basic wrapping that got me moving.)  Nothing fancy, as I really don't have any desire to do the intricate stuff.

So...... I pulled out all my books (and bought a new one ), gathered my spools of copper wire, (and bought some more) and grabbed my tool kit.

On Friday I was gallery sitting by myself in the Graffiti Gallery with very few visitors, so it was a good time to begin practicing.

I made some basic pieces that I'm going to turn into earrings.  One of the things I had to practice was making two pieces that were pretty much alike.  Every time I try to hold two pieces of wire together and bend them it never works.  But, I think I've pretty well figured out how to remake the second piece (with the help of a magic marker.)

I'm going to add beads to these eventually.

Underwire

  NO I'm not talking about bras in this post.  (Although I did just buy a new one with underwire support.  It's obvious I need one.)

   I'm talking about wire under the metal clay to help form it.  The book PMC Technic and Barbara Becker Simons new book both demonstrate the technique.  The first one I tried is rather large and is not yet done.  At first it looked very sculptural to me and I thought about turning it into a sculpture until my friend Carol said she could see it as a piece of jewelry with tubes in it.  So, last week I bought some brass and some copper tubing.  Will share when it finally gets done (don't think that will be any time soon though as the old brain is sometimes slow.)

   The third charm on my bracelet was created with a much shorter (not smaller) piece of copper wire.  The wire was bent into a shape with twists and turns (so far I find it is impossible to predict what the finished clay piece will look like.)  It is important to make sure that the wire sits on the table and that there are no sharp points to tear through the clay.  Then a sheet of clay, 2 cards thick, is rolled out and draped over the wire.  At this point the clay can be formed into the recesses of the wire with the fingers.  Dry the clay and carefully remove the wire.  I thought it would be difficult to take the wire out, but it wasn't.  When the form is totally dry, lay the piece on another 2 card slab of clay (to form the back)and cut around it with a needle tool.  Then paste the back piece to the front piece, smooth the edges together  and fill in any gaps with extra clay or paste.

   Before I joined the back to the front on this piece, I made a wire loop, twisted the ends of the wire and inserted it between the front and back piece.  What I thought was fine silver wire (that's what it said when I bought it), turned out to be sterling silver wire which turned black during the firing process.  As an after thought I decided to add the peridot, so I refired the piece with a readymade bezel cup (and covered the black wire with metal clay paste.)